Here you'll find products and corrosion inhibitors especially for vehicles and bodywork.

For special lubricant, corrosion inhibitant oils and weapon care and maintenance please check out Special Lubricants

Heavy Duty Military and Aircraft approved Corrosion Inhibitor and Lubricant for multi-year protection of metal and bodywork (internal and external)

We recommend LPS3 for treatment of motor compartments and fuselage like doors a.so. where electrical and mechanical parts reside. LPS3 will protect and lubricate locks, windows regulators and else with a flexible film for years! No chance for rust and water - especially recommended for our aluminum bodies and also for winches!

• Stops exfoliation of filiform corrosion of aluminum and steel
• Stops rust and corrosion; protects blank for a minimum of 2 years outdoor!
• Penetrates to displace moisture and protect even smallest chinks
• Resists moisture, sand, dirt, dust and vibration
• Does not contain chlorinated solvents or silicone
• Nonconductive
• Nonstaining
• Remains flexible over time
• Lubricant for mechanical parts
• Easily removed with LPS degreasers
• Safe on most surfaces including rubber, plastics and paint
• No heating required for application!

Conforms to following standards:
MIL-PRF-16173E Grade 2, ASTM F-945, PWA 36604
BMS 3-23 G Type II, TN A.007.10138 Type 1 Grade 2
DMS 2150
NSF Registered H2 (Aerosol #129027, Bulk #059848)

Available as 400ml spray can, 5l and larger bucks. Commercial use only!

We use LPS3 for our HJ60 project to protect the inside of doors, hinges, electrical installation, winch, springs and parts of the engine compartment.

Durable, hard transparent film for metals

HardCoat is recommended to protect regular hollows in your vehicle like runniing boards or fenders. No chance for water and rust - very good with our aluminum bodies!

• Multi-year protection of metal parts
• 500 plus hours salt spray resistance
• Low odor and nonconductive
• Commonly used on sides and tops of aircraft fuselages and, of course, to protect any outside and internal bodywork of vehicles
• Resists dripping and puddling during spray application
• Safe to use on rubber, fabric, plastics and paints
• Ready-to-use and can be applied with conventional airless or
  air-operated spray equipment
• No heating required for application!
• Developed to protect aircraft fuselage!

Meets or exceeds these specs:
Boeing BMS-3-23F Type II

Available as larger can

Durable, hard transparent film for metal and plastics

We recommend Procyon to seal and protect heavyly stressed areas like frames or support. Best to cover it with HardCoat. Work tremendous with Aluminum!

• Multi-year protection of metal
• Low odor
• Wide operating temperature range
• Resistant to saltwater, salt spray (1500 hours!), moisture, acid, alkali, fumes and other corrosive elements
• Resists dripping and puddling during spray application
• Safe to use on rubber, fabric, plastics and paints
• Ready-to-use and can be applied with conventional airless or
  air-operated spray equipment
• No heating required for application!
• Developed to protect aircraft undercarriage compartments and fuselage!
• Copes perfect with the lower stress a surface has in a vehicle (compared to aircrafts, that is)

Meets or exceeds these specs:
Boeing BMS-3-29
Gulfstream GAC115AD

Available as 5l hobbock and larger. Commercial use only!

We use Procyon for our HJ60 project to protect the framwork (inside and outside) and the bodyworks, roof a.s.o.